BLU2Pro & BLU2Lite Camera Support
Camera Support Matrix
BLU2 firmware supports the following cameras.
Update for this latest support.
| GoPro | ||
| Tested | HERO13 Black | Extremely fast connect |
| Tested | HERO12 Black | |
| Tested | HERO11 Black / Mini | Slower connection on first boot of the day |
| Tested | HERO10 Black | |
| Tested | HERO9 Black | Slow boot from deep sleep. Be sure to wake up each morning. Status from QuickCapture may take a long time. |
| Tested | HERO8 Black | Slow boot from deep sleep. Be sure to wake up each morning. Status from QuickCapture may take a long time. |
| Tested | HERO7 Black | |
| Tested | HERO6 Black | |
| Tested | HERO5 Black | |
| Tested | HERO5 Session | |
| Tested | MAX | |
| Tested | MAX 2 | |
| Unsupported | HERO4 and older | No BLE remote control support on these models |
| DJI | ||
| Tested | Osmo Action 6 | PIN pairing: enter 1234 on camera. Extremely fast connect if powered on within 30 minutes. |
| Beta | Osmo Action 5 | PIN pairing: enter 1234 on camera. Limited testing. |
| Tested | Osmo Action 4 | PIN pairing: enter 1234 on camera. |
| Tested | Osmo Action 3 | PIN pairing: enter 1234 on camera |
| Beta | OSMO 360 | PIN pairing: enter 1234 on camera. Limited testing. |
| Unsupported | Osmo Action 2 | Uses a different BLE protocol (pre-Action 3) |
| Unsupported | Osmo Action (original) | Uses a different BLE protocol (pre-Action 3) |
| Insta360 | ||
| Beta | X5 | Connection can take up to 20 seconds. QuickCapture not recommended. Limited testing. |
| Tested | X4 | Connection can take up to 20 seconds. QuickCapture not recommended. |
| Beta | X3 | Connection can take up to 20 seconds. QuickCapture not recommended. Limited testing. |
| Tested | X2 | Connection can take up to 20 seconds. |
| Beta | Ace Pro 2 | Connection can take up to 20 seconds. QuickCapture not recommended. Limited testing. |
| Tested | Ace Pro | Connection can take up to 20 seconds. QuickCapture not recommended. |
| Tested | Ace | Connection can take up to 20 seconds. QuickCapture not recommended. |
| Canon | ||
| Tested | EOS R50 | Shutter trigger and focus control only. No status feedback from camera unless started by remote. |
| Beta | Other BLE-enabled EOS | Compatibility varies by model. |
| Sony | ||
| Tested | BLE-enabled models | General reliability improvements in v3.00.00. No battery or card status. Shutter release only focuses and captures photo. Contact if you need it to start recording in movie mode. |
Status Key:
- Tested Fully tested with this camera model in-house
- Beta Expected to work based on shared protocol, limited in-house testing
- Unsupported Not compatible, uses a different protocol or lacks BLE remote support
